How to Fix Common Fence Repair Problems

Fences can be damaged by a variety of forces. Some, like broken or bent posts, may need to be replaced entirely. Others can be straightened and reinforced.Fence

If your fence post is leaning, dig with a shovel or demolition bar until you expose the concrete footing. Then replace the old post and set it in concrete.

A leaning fence isn’t just an eyesore; it’s also a potential safety issue. Fortunately, with a little time and the right tools, you can straighten a fence post and stabilize the entire fence. Just make sure to use proper safety equipment like safety glasses and gloves when working with heavy or unwieldy materials, and have a friend assist you with any tasks that require two people.

First, you’ll need to determine why the fence is leaning. This may be as simple as the post simply being rotted at its base or the ground giving way and pulling it out of place. It may also be more serious, such as a broken or cracked concrete footer.

Using a shovel, dig around the base of the leaning fence post to reveal the condition of the footer. If the footer is cracked, chipped, or broken, it will need to be replaced.

Next, remove the old footer, if needed, and grade the soil away from the base of the fence post to prevent water from pooling around it and rotting the concrete. You can then install a new concrete footer or a metal brace that goes across the length of the post and attaches to the other side. If you choose to install a new footer, you’ll need to mix and pour concrete, which is a bit more time-consuming than using a pre-mixed product.

You can also reattach the fence panel to the new post by screwing it in place with screws (potentially new ones, if needed). Check the stability of the leaning fence post before and after adding any fasteners, as you’ll need to do this again if the post continues to shift over time.

Another way to fix a leaning fence post is to use expandable foam. This is a quick, inexpensive solution that can be used on wood or concrete posts. Just make sure to follow the manufacturer’s instructions carefully. After applying the foam, you’ll only have about five minutes to adjust the post before it hardens. If you can’t do that, you may need to hire a professional.

Rotten Posts

The wood posts that hold the rails of your fence can begin to rot when they come into contact with too much water. This is a common problem for wooden fences, and it can be quite dangerous. If a single post begins to break down, it can pull on other fence sections and eventually collapse the entire structure. This is why it is important to take care of rotten posts immediately.

It is possible to repair a rotted wooden fence post, but the first step is determining what kind of damage has occurred. Generally, the cause of the damage will be either wet or dry rot. Wet rot is caused by continuous exposure to moisture, while dry rot occurs when the natural oils that protect the wood are stripped away.

In order to properly fix a rotten fence post, you must remove the old one and replace it with a new, sturdy one. To do this, you must dig a hole that is at least twice the size of the fence post’s diameter. The hole should also be between 24 and 48 inches deep. Once the hole is dug, you can set the new post and fill it in with concrete. It is a good idea to mix concrete that will hold up to the elements, such as fast-drying Portland cement.

After setting the new post, you can add a fence rail to it using galvanized nails or screws. For added protection, you can apply a stain to the new post. Staining will help to keep rot-causing moisture out of the wood, and it can be applied at the time of installation or at regular intervals throughout the life of the fence.

In cases where a rotten fence post cannot be replaced, you can use steel splints to stabilize it. These are available at most home improvement stores and are easy to apply. For example, E-Z Mender splints are made for reinforcing 4 x 4 fence posts and are designed to be set in concrete footings. These splints are U-shaped, 28-inch-long jackets made of 12-gauge steel that’s powder coated to prevent rust. The end of each splint is shaped to a point and has a nailing lug punched in it.

Broken Rails

A broken rail may appear to be a minor issue, but it can compromise the integrity of the entire fence. Everything from falling limbs to climbing kids can bend your rail, so be sure to repair it as soon as possible to prevent further damage and protect the safety of those who use the fence.

Broken rails are one of the leading causes of train derailments, which can be deadly for workers on board a moving train. Although technological advances have reduced the number of train derailments, there is still a risk of injury and death if a train hits a broken rail.

There are some steps you can take to prevent broken rails, such as regularly testing your railroad track with new technology. The technology is designed to detect cracks in the tracks so they can be fixed before they become dangerous. However, some railroad companies rely on old methods of testing and don’t carry out the tests often enough.

To repair a damaged rail, first locate the existing rail and determine its size. You’ll also need to decide whether the replacement section will be a full length of rail or a partial one, depending on what needs replacing. Once you’ve found the existing rail, remove it from the post using a wrench or adjustable tool.

Next, straighten the bottom hook of the new rail section and unhook it from the roll of fencing. Using the existing rail as a guide, measure about 12 links longer than the damaged area to determine the width of the new fence section. Then unhook the other end of the new section and remove it from the fence.

Once you’ve removed the old section of fence, straighten the bottom of the new section to match the length of the damaged area. Then, hook the new section onto the existing chain-link and secure it with wire ties, using the same method as the old section of fence.

When you’re done, nail the bottom rail in place, starting from just above grade and driving a 10D galvanized nail at both ends of the new section. Then, apply a generous coat of wood preservative to the rail to prevent further damage from moisture and insects.

Broken Pickets

Even the best fences will eventually need some maintenance. Depending on the type of fence, damage may occur over time or from an event like a storm. You can make some temporary fixes to a fence that’s sagging, mildewed, or broken, but it’s important to address chronic problems as soon as you see them.

The most common repair for a wood fence is to replace rotten pickets. If a picket has become completely rotted, it’s best to remove the whole board and replace it with a new one. Otherwise, the rot will spread and compromise the entire fence panel.

If only a portion of the picket is rotted, you can often save it by cutting off the affected area and using wood preservatives to protect it from further damage. You should also treat the surrounding boards to prevent the rot from spreading.

A good rule of thumb is to replace any boards that are more than 30% rotten. Once the rot spreads, it can quickly undermine the integrity of the entire panel and create holes in your yard.

Wood fence panels can break or be damaged by a variety of events, including storms, falling branches, and heavy vehicles. Most fence panels are made of wood, so they’re susceptible to decay if not properly cared for. Wood fences typically last about eight or ten years, so you should inspect them regularly to look for early signs of deterioration.

If a panel is damaged, it’s often easy to replace it with a new one. Screw blocks of wood to the posts on either side of the damaged panel and under the bottom rail. Remove the screws holding the old panel to the posts and let it fall onto the blocks. Then, screw the new panel into place and reattach the bottom rail.

A broken rail can be more challenging to fix. You’ll need lineman’s pliers, a reciprocating saw, and a new section of railing. First, cut both ends of the bent railing with a saw, and then slip the sleeve of the coupling rod into one of the cuts.

Split Rail Fencing

Split Rail Fencing for a Rustic Look

Split-rail fencing at Charlotte Fence Company provides a classic, rustic look that pays homage to rural living. Typically made of cedar, these fences can complement any home and provide a sense of charm that stands out.Split Rail Fencing

These fences are also relatively easy for homeowners to install. This article will discuss different types of split rail fences and their benefits.

Cedar split rail fences are one of the most cost-effective styles for defining property boundaries, decorating yard areas, and fencing in livestock and horses. This rustic style is also easy to install, making it an ideal do-it-yourself project. Posts are set directly into the ground, approximately. 30″ deep without any concrete. Using a tamping bar, the dirt is compacted around the posts to make it secure for use.

Cedar is one of the most durable types of lumber available for split rail fences and is naturally resistant to decay, insects, and fungus. Its natural color allows it to be left untreated or stained to match the decor of your home and other structures on your property. Cedar is also extremely lightweight, allowing it to be easily handled and used to construct this type of fence.

Pine is another popular option for split-rail fencing. Although it is less expensive than cedar, it isn’t as durable and may require more maintenance over time. Additionally, pine has a yellowish color that may not appeal to all homeowners.

In addition to determining the right lumber to use for your split rail fence, you’ll also want to consider factors like the amount of material needed and the total installation cost. While you can save money by purchasing your own materials, hiring a professional can be the best way to ensure that your fence is built properly and safely.

When estimating the cost of installing your cedar split rail fence, you’ll need to take several factors into account, including:

The amount of materials needed will be the largest factor in determining your fence’s cost. If you’re fencing a large area, the cost will increase for each additional linear foot of fencing. The number of rails per section will also affect the overall cost. Choosing a 3-rail fence instead of a 2-rail fence will cost more, but it will be sturdier and better suited for your needs.

Other factors that will influence your final fencing costs include the terrain where your split rail fence is being installed, the type of soil you’re working with, and the time of year when you’re purchasing your materials. Homeowners who are interested in saving money on their fence installation costs should shop around and compare quotes before making a decision.

Black Locust

Wood split rail fences are one of the most traditional fencing styles, and they are a great option for those looking for a rustic and natural-looking fence. These fences are typically made using black locust posts with hard wood rails. They can be used for a number of purposes, including containing livestock and defining property boundaries. The fences also provide a scenic backdrop for property views. There are several advantages to a wood split rail fence, including its durability and low maintenance.

Black locust split rail fences are very strong, and they can withstand the elements for decades without the need for treatment or chemical applications. They are also rot-resistant and insect-proof. This makes them an excellent choice for a farm or ranch fence. Additionally, the black locust split rails have a distinct greenish-yellow tint when first cut that will darken to a golden color over time.

Cedar is another common choice for a wood split rail fence, but it can be more expensive than other types of lumber. Additionally, cedar is not as durable as black locust, and it is more susceptible to rotting in wet soil conditions. However, it is an attractive option for those who want a classic cedar fence, and the wood’s natural ability to resist moisture and insects makes it a good choice in many climates.

Western red cedar is also a common type of split rail fence, and it is an excellent choice for those who want a fence that will last for years without the need for chemical treatments. These fences are also resistant to rot, and they will not lose their shape or strength over time.

Compared to western red cedar, pressure-treated yellow pine is less expensive, but it is not as durable. This type of wood can be treated with chemicals to fight rot and other destructive forces, but it is not as strong as either black locust or black locust split rails.

Depending on the region, black locust can be purchased at a moderate price. It is a dense wood, and it is often mixed with other hardwoods to create a more affordable fence. It can also be purchased pre-treated to combat the effects of weathering and aging.


Split-rail fencing is a great way to add a rustic and natural look to your property. It’s also relatively inexpensive, making it a good choice for homeowners who want to keep their pets and kids safe on their property without breaking the bank. However, there are a few things you should know before having this type of fence installed.

A two-rail split-rail fence is a common choice for residential properties and country gardens. This type of fence provides clear boundary definition and works well with a variety of home styles and designs. Additionally, it doesn’t block your views or landscapes like other types of fencing can, allowing you to enjoy the beauty of nature that surrounds you.

Most often, this style of fence is made of oak, which has a beautiful grain pattern and natural color that will hold up to the elements over time. Cedar is also a popular material for split rail fencing, but it can be more expensive than oak.

Another option for a split rail fence is high-quality poplar, which has a similar appearance to cedar but is more affordable. If using poplar, make sure it’s pressure-treated to increase durability and longevity.

In addition to the cost of materials, there are other factors that can affect the total cost of your split-rail fence. For example, the amount of labor involved will play a role in the overall price. If you choose to have a professional install your fence, it’s important to get several quotes before choosing a contractor. This will help you avoid overpaying and ensure that you’re getting the best value for your money.

One of the most significant ways to lower your split rail fence cost per foot is to stain or paint the wood. This will protect the wood from weathering and rot and prolong its life. Additionally, it can help to give the fence a more appealing color, which will attract less attention from unwanted pests and weeds.

Another way to save on the cost of a split rail fence is to install it yourself. While this can be a challenging project for beginners, it is not impossible. Depending on the size of your yard and the number of split rail posts needed, this can be an affordable option for homeowners who have the time and tools necessary to complete the project.

Wire Mesh

Split-rail fencing gives your property a pastoral feel that evokes images of horses and cowboys. However, the wide gaps between split pickets can leave your garden vulnerable to smaller animals like foxes and coyotes. To keep these creatures out of your garden or prevent them from attacking livestock, you can add wire mesh to your split-rail fence. Wire mesh is relatively inexpensive and can be easily attached to your existing split rail fence, though you may want to consider having a contractor do it for you.

Whether you’re installing a wood, composite, or metal split rail fence, the price is going to be dependent on how much of your property you’re fencing in and what material you choose. Homeowners who have construction experience can often save money on their split rail fence installation by doing it themselves rather than hiring a professional contractor. However, this isn’t always possible for homeowners who aren’t comfortable working with power tools.

When determining your split rail fence cost, you should start by getting a quote on how much materials and labor are going to cost for the project. To get a more accurate estimate, enter the specific details of your project into our fence calculator. Once you’ve determined the amount of material and labor your project will require, you can begin planning the construction.

Before starting to build your fence, it’s a good idea to set, plumb, and brace your corner posts first. This will give you fixed points to work off of, and it will help ensure that your fence is perfectly straight. You should also use a level to make sure that each post is evenly spaced and has an even slope.

Once your corner posts are set, it’s time to begin constructing the rest of your fence. It’s important to start with a strong foundation, so be sure to use concrete or stakes in your holes. When adding stakes, it’s a good idea to use steel ones rather than wooden ones. These stakes will be more durable and last longer than wooden ones.